Log-in via Motorcortex Controller

less than a minute

Access the DESK tool straight from the controller (no internet access required).

Prerequisite

The additional DESK addon is required, purchasable through motorcortex sales.

Open your browser and go to [Controller IP address]:8000, per default 192.168.2.100:8000

Note

The Motorcortex desk is protected by a login because the user can manipulate signals and behavior of the control system.

Server Address is the IP address of the controller (Host), per default 192.168.2.100. Optionally the request port and subscribe port can be defined. If nothing is filled-in for these ports, the default of 5568/5567 will be used.
/ Option to choose a secure or unsecure connection. Default is secure.

Note

The user authentication is disabled at this stage. Meaning Login and Password is not required, every entry is valid. If user authentication is enabled fill in step 4 and 5.

Login, if user authentication is enabled you have to fill in the login name of your user account.
Password, if user authentication is enabled you have to fill in the matching password to your login name.
Pressing Connect establishes a connection with Desk-tool.